The aircycle 1.3 range operates by efficiently recovering heat from the air extracted from wet rooms (bathroom, kitchen etc.) that would normally be expelled to the atmosphere. Suitable for small to medium dwellings and apartments.
Heat Recovery Ventilation
A heat recovery ventilation system based on the Brookvent aircycle heat recovery unit allows for maintaining excellent indoor air quality while minimizing heat loss.
What are the benefits of the Aircycle heat recovery system?
Energy Savings: Recovering heat from the extracted air (instead of directly releasing it into the atmosphere) allows for significant energy savings, reducing your energy bills. Unlike traditional methods of bringing in fresh air through window vents, using heat recovery ventilation results in fresh, filtered air being supplied to your living spaces that is only an average of 1.5 degrees Celsius cooler than the extracted air from your home.
Whole House Ventilation: The heat recovery ventilation system continuously removes polluted air and replaces it with fresh, filtered, and heated air in the living spaces. The continuous air circulation reduces humidity in the house and eliminates problems associated with polluted air, such as condensation and mold. Additionally, the user receives fully controlled and comfortable ventilation that can be adjusted to their requirements.
Fresh, Filtered Air: Before reaching the living spaces, fresh air passes through filters that capture particles such as pollen and other air pollutants. This creates a very favorable environment for allergy sufferers or asthmatics.
Quiet Solution: The heat recovery ventilation system is typically installed in the attic or utility room, making it very quiet during operation. The system eliminates the need for loud individual duct fans and window vents that allow external noise to enter the living spaces.
-
-
The Brookvent Digital Aircycle 1.3 heat recovery ventilation system is highly versatile, as it can be wall, ceiling or floor mounted, perfect for the constraints of small to medium apartments and domestic properties.
Quiet and efficient, the digital Aircycle 1.3 takes the heat from wet rooms, such as your kitchen or bathroom, and recycles that heat. The heat is then infused into fresh air and dispersed around the other rooms of your home, making your house so much healthier and more comfortable for everyone who lives there.
Core features include up to 65 l/s at 150 Pa max airflow and up to 92% heat recovery efficiency. With remote digital control (with status indication, sold separately), and 4 Airflow modes – Night, General, Boost, and Purge, the system is reliable, efficient, and versatile. A five-year manufacturers’ guarantee shows that reliability is paramount.
-
The aircycle 3.1 operates by efficiently recovering heat from the air extracted from wet rooms (bathroom, kitchen etc.) that would normally be expelled to the atmosphere. Suitable for medium to large dwellings and apartments.
-
![AC-3.1-with-digital-controller-768×768-1[1]](https://brookvent.info/wp-content/uploads/2023/11/AC-3.1-with-digital-controller-768x768-11.jpg "AC-3.1-with-digital-controller-768×768-1[1]")
The Brookvent Aircycle 3.1 Digital range is the perfect choice of heat recovery ventilation system for medium to larger dwellings and apartments.
The Aircycle 3.1 Digital heat recovery ventilation system extracts the heat from your wet rooms such as bathrooms and kitchens, and infuses this heat into the fresh air, allowing for healthier, more comfortable conditions inside your residence for all inhabitants.
Offering up to 65 l/s at 150 Pa max airflow, down to 0.37 W/l/s specific fan power, a programmable 25% boost setting and 4 Airflow modes (Night, General, Boost, and Purge), amongst other benefits, this versatile system (it can be wall, ceiling or floor mounted) also offers up to 93% heat recovery efficiency- making it quite simply the best in its class. A remote digital control with status indication (sold separately) offers enhanced controllability packaged in a user-friendly interface, allowing for bespoke commissioning to fit each project.
-
![AC-3.1-with-digital-controller-768×768-1-600×600[1]](https://brookvent.info/wp-content/uploads/2023/11/AC-3.1-with-digital-controller-768x768-1-600x6001-1.jpg "AC-3.1-with-digital-controller-768×768-1-600×600[1]")
The Brookvent Aircycle 4.1 Digital Range House Ventilation System is suitable for medium to large dwellings and apartments, with an area of up to 285m².
With unrivalled performance, the 4.1 offers up to 93% heat recovery efficiency, pulling the heat out of your ‘wet’ rooms (such as kitchens and bathrooms) to heat fresh air which it then supplies to the other rooms throughout your home.
-
Aircycle 5.1 is a continuous running heat recovery unit, transfers heat from humid air extracted from wet rooms to warm incoming fresh air which is ducted to habitable rooms. Thanks to the easy-to-fit air distribution system each single ambient can be properly ventilate: the boost function enables rapid extract of increased moisture or pollutant levels. It also provides discrete installation and very quite operation. Suitable for large houses.
-
The aircycle ONE PRO is an advanced single-room heat recovery unit designed to provide continuous fresh air while efficiently reclaiming thermal energy. It delivers effective ventilation, helping reduce indoor pollutants and excess humidity for a healthier, more comfortable living space. Featuring a reversible airflow system with a high-performance ceramic heat exchanger, it maximises heat recovery and energy savings.
Suitable for installation in external walls with thicknesses ranging from 300 to 570 mm.
-
Aircycyle slim is a whole-house air heat recovery ventilation unit. It is designed for ceiling and suspended ceiling installation. Suitable for small houses and medium-sized flats.
-
The aircycle T 1.35 series of heat recovery ventilation systems is the smallest ventilation unit in the Brookvent offer. Thanks to patented solutions, they perfectly combine very compact sizes of the device with high efficiency. The combination of extremely low energy consumption and the highly efficient heat exchanger makes the aircycle T 1.35 heat recovery system versatile enough to provide efficient ventilation in both larger apartments and small to medium-sized houses.
-
![T20-1[1]](https://brookvent.info/wp-content/uploads/2023/11/T20-11.png "T20-1[1]")
Aircycle T 20 units are designed to achieve very high: airflow levels – up to 640 m3 / h and heat recovery efficiency – up to 92%. The combination of these features makes the aircycle T 20 suitble to medium and large houses.
-
![T200-1[1]](https://brookvent.info/wp-content/uploads/2023/11/T200-11.png "T200-1[1]")
The aircycle T 200 units are known from high efficiency and low energy consumption in a horizontal configuration – ceiling mounting. The devices of this series are suitable to larger apartments and small houses.