The TLS silencer is used in round ventilation ducts. As a standard, the silencers are delivered with a rubber seal. Inside they are filled with 50 mm thick mineral wool.
aircycle T1.35
The aircycle T 1.35 series of heat recovery ventilation systems is the smallest ventilation unit in the Brookvent offer. Thanks to patented solutions, they perfectly combine very compact sizes of the device with high efficiency. The combination of extremely low energy consumption and the highly efficient heat exchanger makes the aircycle T 1.35 heat recovery system versatile enough to provide efficient ventilation in both larger apartments and small to medium-sized houses.
How does a heat recovery ventilation unit work?
Heat recovery is the process of recovering heat energy in order for it to be reused. In ventilation systems, this consists in recovering heat from the exhausted, used up air and transferring this heat to the supply air. Polluted air is extracted from rooms such as: kitchen, bathroom, toilet through a network of ventilation ducts and fresh air is blown into the living room, bedrooms. Air distribution is most often performed through diffusers connected to appropriate ducts. The system works continuously and the fresh and heated air is additionally cleaned thanks to built-in filters. Thanks to the application of a modern counter-flow heat exchanger in the heat recovery ventilation unit, where the supplied and extracted air streams are tightly separated from each other, polluted air does not get mixed with fresh air. The exchanger, by making use of temperature differences between the air streams, heats up the cooler one. The Brookvent heat recovery systems are very efficient since, depending on the AHU model, they are able to recover
even up to 93% heat.
Related Products
-
-
CSR-B EC W, CSR-B EC Zero Plus W, CSR-B EC NFC W controller
Controllers of the CSR-B series are constant pressure regulators designed for cooperation with duct and roof fans with EC motors. By continuously controlling the fan speed, they ensure constant pressure in the ventilation ducting. Based on a PI controller, CSR-B controllers have the option to set a constant fan power and programmable upper and lower fan control limits. -
The RDR flow regulator is a component that is installed inside a duct to achieve a constant flow rate in a pressure range between 50 and 250 Pa. It is used in ventilation and air-conditioning systems, in the extract or supply air.
The RDR volume flow controller can be adjusted during installation to a given volume flow. The RDR controller has graduations on the sides of the opening to illustrate the level of adjustment.