The low-energy, extremely quiet and efficient central fan with humidity sensor has been designed for the removal of stale and humid air.
-
-
A continuous running centralised single flow ventilation unit (airstream) extracts the stale air from different rooms contemporaneously, with top acoustic comfort. To be used in combination with self-adjusting air inlet. Thanks to the easy-to-fit air distribution system each single ambient can be properly ventilate.
-
![airstream-ACE-controller-HVN-Finalist[1]](https://brookvent.info/wp-content/uploads/2023/11/airstream-ACE-controller-HVN-Finalist1-1.png "airstream-ACE-controller-HVN-Finalist[1]")
The Brookvent Airstream ACE is an award-winning Continous Mechanical Extract Ventilation (MEV) system, which has been designed specifically with homes and apartments in mind. This innovative tech, suitable for all wet rooms, is versatile to install with wall, ceiling and floor mount options, and the compact design allows ventilation in spaces such as attics, plant rooms, and service voids, where bigger units wouldn’t be appropriate. The continuous fan ensures the removal of indoor pollutants and good IAQ.
-
Self-regulating air extract grilles Alize are intended for the extraction of air from sanitary rooms such as: kitchens, bathroom and toilet. They can be used in residential and public buildings. Grilles are mounted in ventilation systems at the ends of exhaust ducts.
-
Base plate with a PP connector
Base plate with a connector (optional). An element closing the bottom of the roof base equipped with a 100, 125, 160, 200 or 250mm-diameter connector.
-
The BHY PRO grille is fitted as standard with a polyamide tape-based humidity sensor that does not require power. As the humidity in the air changes, it changes its length, causing the damper to open wider or narrower, automatically regulating the air exchange in the room.
-
BKO ventilation fans are designed for domestic ventilation systems, acting as supply or exhaust fans. Depending on the version, they circulate clean air in the appropriate direction.
-
Designed for external, roof-mounted installation at the ends of ventilation ducts in residential, commercial and industrial buildings with low levels of particulate air pollution. The fan can work with the CSR-B controller, which will ensure stable ventilation operation under all conditions and exactly according to the design guidelines.
-
A roof fan designed for external installation, at the ends of ventilation ducts in residential, commercial and industrial buildings with a low level of particulate air pollution. The fan can cooperate with the CSR-B controller, which will ensure stable ventilation operation in all conditions and exactly according to the design guidelines.
-
It is used to switch on/off and change the speed of fans which are based on multi-speed motors.
-
Potentiometer designed to set the desired speed value for fans equipped with electronically commutated EC motors. The potentiometer requires a power source max 10-12V DC / 1mA, which is available from the EC fans. The output is a stepless 0-10 V DC signal. Resistance 10 kΏ.
-
![BR-TWIN-PHOTO[1]](https://brookvent.info/wp-content/uploads/2023/11/BR-TWIN-PHOTO1.png "BR-TWIN-PHOTO[1]")
The BR-TWIN 1-010 EC potentiometer is designed for electronically commutated EC motors. It allows for setting two speeds and has a NO input (e.g. for a timer or CO2 sensor). The potentiometer is supplied with a signal up to Uc max = 15V. It has enclosure protection class IP 65.
-
The BRF 125 airtight backflow prevention damper is installed inside the ventilation duct. It effectively prevents undesirable backflow of air.
-
BRF Magneto magnetic backdraught shutter has been designed to be mounted inside 125mm diameter round ventilation ducts to prevent the return of ventilated air. The product stops the ingress of external air at extractor hoods.
-
Centrifugal duct fan in an insulated enclosure designed for installation in residential, commercial and industrial buildings with low degree of particlepollution. The fan can work with CSR-B controller which ensures stable ventilation in any conditions that will be performed exactly according to the design guidelines.
-
The jet fan has been designed for installation in car parks and large spaces to efficiently remove contaminated air.
Brookvent offers a wide range of products, including:
- BMV roof fans designed for mechanical ventilation systems, including low-pressure, humidity-controlled, and constant-flow options,
- Several models of aircycyle heat recovery units suitable for different building volumes, as well as central airstream fans.
- Grilles, dampers and others
Our proposed solutions guarantee optimal system performance in terms of air exchange, acoustics, and operating costs, ensuring the best possible results.