The BSP PRO fan belongs to the group of ductless fans intended for operation in mechanical ventilation systems for garages and underground car parks in the area of domestic ventilation. It reduces concentrations of gases hazardous to health.
-
-
BTP EC PRO series fans are used in ventilation systems that require relatively high pressure, strong air flow and low noise levels. They are an excellent solution for ventilation systems in residential buildings, collective housing and public buildings.
Designed for ventilation ducts with diameters of 125, 160, and 200 mm.
-
The BVK PRO EC roof fan is designed for external installation, at the ends of ventilation ducting, in garages, residential, commercial and industrial buildings with a low level of particulate air pollution.
FEATURES
— Vertical air discharge;
— Galvanised sheet metal construction;
— EC motor
— 0-10V control
— Adaptor plate with spigot has been added to in the kit -
BZZ backflow prevention device
The BZZ damper prevents uncontrolled air flow in the opposite direction when the ventilation system is switched off.
-
CAR backflow prevention device
A CAR, airtight backflow prevention device, is used in ventilation systems fitted for round ventilation ducts. It prevents the so-called air backflow and protects rooms against cooling in the winter.
-
CFDM fire dampers are diaphragms in ducted ventilation systems that prevent the spread of fire and products of combustion from one fire segment to another by closing the air duct at points of fire separation structures. The damper diaphragm automatically closes the air duct with a closing spring.
-
Rotary chimney cowl that uses wind power to support the chimney draught. Equipped with a low-power brushless motor for its effective stabilisation. Dedicated to single and multi-family dwellings.
-
CSR-B EC W, CSR-B EC Zero Plus W, CSR-B EC NFC W controller
Controllers of the CSR-B series are constant pressure regulators designed for cooperation with duct and roof fans with EC motors. By continuously controlling the fan speed, they ensure constant pressure in the ventilation ducting. Based on a PI controller, CSR-B controllers have the option to set a constant fan power and programmable upper and lower fan control limits. -
![tlumik_przepustnica_IO_PRO_Brookvent_wentylacja_2023[1]](https://brookvent.info/wp-content/uploads/2024/01/tlumik_przepustnica_IO_PRO_Brookvent_wentylacja_20231.jpg "tlumik_przepustnica_IO_PRO_Brookvent_wentylacja_2023[1]")
The IO PRO silencer – damper is a useful and easy-to-install component for ventilation systems in the ventilation accessories category. It performs the functions of pressure regulation and sound attenuation. The damper is made of high-quality polyurethane foam and can be installed in both new and existing ventilation systems. Multiple dampers can be installed to maximise sound attenuation. Installation guidelines must be followed to ensure proper function.
-
The KKB damper is designed to automatically cut off the air supply during a fan outage.
-
NovaAir anti-smog filter for wall vents.
-
A flat-roof base is made of a galvanised sheet. Two types of roof bases are available:
- PDI — insulated with is a 10mm insulation (polyurethane foam) inside preventing condensation and
- PDT — silencing, with 50mm insulation (mineral wool).
The collar around the base allows the base to be firmly attached to the roof.
-
The RDR flow regulator is a component that is installed inside a duct to achieve a constant flow rate in a pressure range between 50 and 250 Pa. It is used in ventilation and air-conditioning systems, in the extract or supply air.
The RDR volume flow controller can be adjusted during installation to a given volume flow. The RDR controller has graduations on the sides of the opening to illustrate the level of adjustment.
-
thyristor speed controller BS 1.5
Used in ventilation systems to switch on/off and regulate the speed of single-phase electric motors of voltage-controlled fans.
-
thyristor speed controller BS 1.8
Used in ventilation systems to switch on/off and regulate the speed of single-phase electric motors in voltage-controlled fans.
-
TLE flexible acoustic silencers
A flexible TLE acoustic silencer is made of a perforated duct. The applied insulation is 25mm thick and covered with an aluminium-polyester jacket. The silencer is connected with metal flanges acting as a nipple. These are available in two lengths, 600mm and 1,200mm. Upon request, it is possible to manufacture silencers: with EPDM
Brookvent offers a wide range of products, including:
- BMV roof fans designed for mechanical ventilation systems, including low-pressure, humidity-controlled, and constant-flow options,
- Several models of aircycyle heat recovery units suitable for different building volumes, as well as central airstream fans.
- Grilles, dampers and others
Our proposed solutions guarantee optimal system performance in terms of air exchange, acoustics, and operating costs, ensuring the best possible results.